Well, after a bit of a delay through Customs it finally arrived - and surprisingly enough it's, erm, a sword (!). :p

The sword was well packaged and undamaged - so full marks to 888KnivesRUs for their efforts. I need to clean it up a bit and give it a good going over but my first impressions are:

(1) - the darn thing is SO much smaller and lighter than I imagined (clearly I've learned nothing about swords in the last month...! ) :D As Sean has pointed out elsewhere, I'm also a little surpried (in a naieve, novice sort of way!) just how flexible the blade actually is. We'll see in due course whether or not it's TOO whippy. When static, the blade balances at about 3.5" from the centre of the cross.

(2) - the sword itself appears to be pretty cleanly done - I'm no expert but the fuller appears to be nicely centred and doesn't seem to suffer from undue waviness; the cross is clean and well centred; the pommel (as discussed above) appears to be threaded and peened and the whole hilt assembly seems pretty solid (at least at the moment). The stitching on the leather of the grip is a little chunky but I can live with it for now. The size of the grip seems pretty good for me, the primary section between the cross and the riser could have done with being just a tiny but longer (I do have pretty big hands) but the long pommel is very comfortable and just the right size for my left hand! I might shuffle the placement of the riser back a bit if I ever get around to doing a re-grip.

(3) - the scabbard is OK, with a reasonable chape and a well fitting locket at the throat that fits the shape of the cross pretty well and is also a reasonably neat fit for the proximal blade. Distally, however, the scabbard is way too loose and clearly suffers from being a standard scabbard for several of Windlass' models. The glossy black finish will be removed just as soon I can get around to it and the scabbard treated to some leather oil. On the whole, it's not bad though - and reading everything that's been posted about Windlass I'm not all that disappointed - it is pretty much what I had been led to expect! ;)

Overall then, I was anticipating a weapon that was pretty good but one that was still very much in the budget category - and I *think* that's what I've got. Whilst I've not met these swords in the flesh, I have no doubt that my Towton is not an Albion Sempach nor is it a Gus Trim bastard but then it's definitely somewhat more than just a wallhanger and it cost me rather less than half the price of either of those - so I'm not complaining! As a place to start, and working within an extremely tight budget, I think it'll do me quite nicely, thank you very much!

At least I no longer feel like a complete fraud here! :eek: :lol:

The Towton is reasonably close to the physical dimensions of the type that it seeks to model. The weight is also close to correct. For a stainless steel sword it would be hard to do better, if you are interested in a blunt sword that looks and feels like a late 15th Century Western European product.

Stainless...?! :eek:

I know it's not the best steel in the world (!), but I didn't think they were stainless!! :surprised:

I haven't even thought about stripping the Windlass laquer coat yet (though I will, and soon...) but I have de-glossed the grip with methyl alcohol and rubbed in some nubuck waxed leather feed for a nice, grippy matt finish. ;)

As you may be able to see from the attached pic, I got a little carried away with stripping back the leather scabbard however...
Fortunately, I actually quite like the rather faded and antiqued look I've managed to achieve (!). :lol:

I'll try to do some better pictures later.

---

 Attachment: 58.04 KB

Just been for a quick look:

Windlass Steelcrafts'
The Towton

Blade Length: 36
Overall Length: 44
Blade Material: High Carbon 1065/1095
Weight: 2 lbs. 12 oz.

Now, I'm sure it's nowhere near the quality of the steel and forging found in some of the products at the higher end of the market but that sure doesn't sound like stainless to me! ;)

When I bought my Towton last year I was suspicious of the polished surface of the blade, which seemed abnormally shiny. So I checked back to the web page that I ordered it from, and I am sure it said then that it was in fact a stainless blade. That same web page now clearly states that the Towton as it is now sold has a high carbon blade. I have no reason to doubt that the current production run of the Towton has a carbon steel blade. But I still suspect that my own example does not, since it is much more polished than any of my carbon steel swords. Since I can't claim to recognize steel alloys by eye, I can't provide a definitive answer.

That sounds fair enough! :D

Steve, I know you said you'd attacked your Towton with steel wool so you're aware of the Windlass laquer coating and that can't be the cause of the abnormally shiny surface.

I have no real idea how to tell the difference definitively between high carbon and stainless steel either (short of leaving it in the back yard and waiting fot it to rust...!) but this seems to be one nicely flexible blade.

I am referring to the sheen on the blade after I had it stripped, rather than before. Obviously it's not made of the same stuff as kitchen flatware, but it seems to have more than a hint of chromium somewhere in the mix to give it such a shine. Since I bought mine for display only, I did not perceive the choice of a more durable alloy as a real drawback.

We tend to think of all production swords as being identical items run off an assembly line. In fact there are variations and a lot of modifications from one sword to another, even when there has been no intentional design change. I would not be amazed if the Towton design began life with one choice of blade stock, and is now being made with some other grade of steel altogether. As long as you receive a product that meets the description given when you ordered it, no harm done.

Great review of the Towton, Bruce. There's no question that Windlass swords are not in the same leaque with Albions or Atrims, but they are cheap, fun, and functional pieces. I've now done some rather extensive cutting with my Windlass "Drac" sword, and have had no complaints. I have finally decided to break down and by an Atrim, however. :lol: In a few weeks, I will be making a deposit on one of Gus' 1211 models. WooHoo! :lol:
As far as the Towton being stainless steel: nope. Most of their stuff is 1095 carbon steel. Windlass does tend to polish the heck out of their blades, giving them that "too shiny" look, they are not, however, stainless steel. If the Towton was listed as having a stainless blade, it was a mistake on the part of the vendor. Many online knife sellers make various mistakes in their descriptions of swords. The whole reason Windlass/MRL sells theur swords/daggers with a clear laquer finish on the metal parts is so that they will not rust during shipping/storage before being sold. :)

Sean Flynt and others have found that hilt components on MRL swords are sometimes stainless steel. Hanwei does this too on some products. You can still advertise the item as "all-steel" construction that way. :)

The Towton may have stainless hilt components. I've never heard of Windlass/MRL using stainless for their blades, though.

MRL will sharpen their swords for a small fee. One thing to keep in mind is that the sword will not be eligible for their return policy if it's been sharpened. Considering MRL's erratic quality control you may want to try sharpening the sword yourself after you receive it, once you've made sure that it's acceptable to you.

Looks like many of our Towton questions have been answered! :lol: Check out Chad's new review of the Towton. Well done, Chad. Now I kinda wish I'd gone ahead and bought one. :mad: D'oh! :lol:

Never mind, Scott - there's plaenty of time after you've paid for the atrim...! :lol:

Thanks to Chad for the the review and the pics - it pretty much covers everything I was thinking about this sword and then some. There's been talk about the Towton in several places on the net so it's good to finally see an "official" review of it by a "sword site". :D

I'll let you all knowhow I get on with mine after I've done some training with it next weekend...
The second coming of Fiore? Somehow I doubt it - I guess I'll be all fingers and thumbs (and probably two left feet too...) :eek: ;)