Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Historical Arms Talk > Confederate D Guard BowieDIY Project Reply to topic
This is a standard topic  
Author Message
Paul Mullins





Joined: 22 May 2006

Posts: 120

PostPosted: Wed 21 Jan, 2015 8:00 am    Post subject: Confederate D Guard Bowie         Reply with quote

I have wanted one of these for some time now. Originals are tough to find and well beyond my budget of willingness to pay. Most of the commercially available models are jazzed up with CSA markings or they are poor quality. Plus, I wanted something unique and was closer to extant originals. So, I decided to make my own from a 100+ year old saw blade that was once owned by my father. It is approximately 3.5 mm thick, so not as thick as the one I copied but it is close.

I found an original here that listed all of the measurements, so it is almost exact to the original.

http://www.collegehillarsenal.com/shop/product.php?productid=1053

I am a little off on the shape of the finial on the cross but I can live with that, since these were all handmade originally. I also used a piece of native cherry for the grip panels, it is what I had on hand. It also appears there is a ricasso in the photo but this is simply a trick of the lighting.



 Attachment: 79.9 KB
bowiecsa.jpeg

View user's profile Send private message AIM Address Yahoo Messenger
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

PostPosted: Wed 21 Jan, 2015 8:08 am    Post subject:         Reply with quote

I love that! It looks just right to me, and the blade construction is exactly how many men made their blades. One of the Foxfire books describes and shows how this was still done in Appalachia as late as the 1970s. I believe that's how my gg grandfather's knife was made. See my post/photos at the bottom of this page: http://www.myArmoury.com/talk/viewtopic.php?t...p;start=60

I've long wanted to make a D-guard bowie or similar CSA fighting knife.

-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
Ken Speed





Joined: 09 Oct 2006

Posts: 656

PostPosted: Wed 21 Jan, 2015 9:06 am    Post subject:         Reply with quote

You did a very nice job. There was a confederate Bowie in a small new England town library that i saw once. the knife was huge, close to 24" long as well as I could tell. It was much like your replica in many ways. some time later I was talking to a Civil war reenactor and he said the swords the officers carried were mostly used to signal their troops and he said the big bowie knifes were used by foragers searching for food much more than as weapons.
View user's profile Send private message
M. Livermore





Joined: 20 Aug 2008

Posts: 96

PostPosted: Wed 21 Jan, 2015 9:32 am    Post subject:         Reply with quote

That looks great. The lines all look right, especially for some Virginia pieces I have seen, and the transition to a round cap at the end of the guard looks spot on. Are the pins brass? Iron might be more appropriate, but that is small nitpicking on my part. I really like it.
View user's profile Send private message
Paul Mullins





Joined: 22 May 2006

Posts: 120

PostPosted: Wed 21 Jan, 2015 9:54 am    Post subject:         Reply with quote

Thank you, gentlemen!


Mr. Livermore,

The pins are brass, just like on the original I copied.
View user's profile Send private message AIM Address Yahoo Messenger
M. Livermore





Joined: 20 Aug 2008

Posts: 96

PostPosted: Wed 21 Jan, 2015 1:15 pm    Post subject:         Reply with quote

So they are. I just looked on a bigger screen than my phone. That makes the original an interesting example. Thanks for pointing it out.
View user's profile Send private message
J. Nicolaysen




Location: Wyoming
Joined: 03 Feb 2014
Likes: 32 pages

Posts: 795

PostPosted: Wed 21 Jan, 2015 5:37 pm    Post subject:         Reply with quote

Well done, it is a great looking knife.
View user's profile Send private message


Display posts from previous:   
Forum Index > Historical Arms Talk > Confederate D Guard BowieDIY Project
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum