Author |
Message |
Stanford B
|
Posted: Wed 02 May, 2007 5:50 pm Post subject: |
|
|
I a bit new here been lurking for a short time but had to come out of the woodwork to say this is one of the finest blades and furniture I have seen in a long time. Does it ring? Have you photoed the scabard yet?
Stanford B
S.B.Bernheim a.k.a. Balldrich BallBarian MSCA,PEL
|
|
|
|
Rob Miller
Industry Professional
|
Posted: Thu 03 May, 2007 12:42 am Post subject: |
|
|
Thank you Stanford,I am still trying to get the Birch boards to begin the scabbard work,so i would imagine it will be another few weeks before i have something to add,the casting can take time too,whilst we cast all the silver here,when it comes to larger parts such as Bronzes and Stainless i have to use a foundry in England,they can take five or six weeks to turn a piece around,so i get excited about making a project,and then have to dampen my own enthusiasm for a Month or so
|
|
|
|
Bob Burns
|
Posted: Sun 13 May, 2007 12:13 pm Post subject: |
|
|
Such extraordinary beauty that this sword would be the Pride of any collection, regardless of how wealthy the collector!
Bob
|
|
|
|
Adam Simmonds
|
Posted: Mon 14 May, 2007 6:43 pm Post subject: |
|
|
that sword is just stunning
it is a real inspiration and pleasure to see such dedication and artistry alive and well in a mass produced world.
thanks for sharing, adam s.
|
|
|
|
Lee O'Hagan
|
Posted: Thu 14 Jun, 2007 10:52 am Post subject: |
|
|
Hi Rob,
Did you manage to get your materials on time,
Any pics to share of this project of late,
Cheers.
|
|
|
|
Rob Miller
Industry Professional
|
Posted: Thu 14 Jun, 2007 11:02 am Post subject: |
|
|
Hi Lee,
I did get the boards,and have just started on the waxes,as you can see from the pic,there will also be a panel of runes running down the length of the Scabbard,waxes go to the foundry next week,so then it is a matter of waiting.the birch is very nice material to work with.
Attachment: 76.46 KB
|
|
|
|
Shayan G
|
Posted: Thu 14 Jun, 2007 11:11 am Post subject: |
|
|
Stanford B wrote: | I a bit new here been lurking for a short time but had to come out of the woodwork to say this is one of the finest blades and furniture I have seen in a long time. |
I agree completely...gorgeous and deadly. The word that immediately popped into my head was "Excalibur." That's what I always imagined it looked like. <-me after seeing the photos
|
|
|
|
Lee O'Hagan
|
Posted: Thu 14 Jun, 2007 11:26 am Post subject: |
|
|
Cheers Rob,
I'l look forward to the coming pics when your all done,
Cheers.
|
|
|
|
Rob Miller
Industry Professional
|
Posted: Wed 01 Aug, 2007 9:28 am Post subject: |
|
|
finally,after making another blade and fittings,the Scabbard is finished,the Birch is lovely to work with.
Attachment: 104.74 KB
Attachment: 120.06 KB
|
|
|
|
Allen Andrews
|
Posted: Wed 01 Aug, 2007 12:41 pm Post subject: |
|
|
Simply wonderful. I have full blown sword envy. Someday perhaps.......
" I would not snare even an orc with a falsehood. "
Faramir son of Denethor
Words to live by. (Yes, I know he's not a real person)
|
|
|
|
Steve Grisetti
|
Posted: Sat 04 Aug, 2007 6:39 am Post subject: |
|
|
Your artistry looks fabulous, Rob! The burl in the wood is beautiful, and the bronze looks great with it. And the sword is stunning!
Rob Miller wrote: | finally,after making another blade and fittings.... |
I'm confused - do you mean for another sword? Or was there something wrong with this one?
"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
|
|
|
|
David Huggins
|
Posted: Sat 04 Aug, 2007 7:17 am Post subject: |
|
|
Nice crisp executed castings Rob. Just one question, is the original blade patten-welded in the conventional sense or actually damascened as in your interpretation?
|
|
|
|
Rob Miller
Industry Professional
|
Posted: Sat 04 Aug, 2007 11:59 am Post subject: |
|
|
Hi Steve,
the first blade had a couple of small faults in the welding,so i scrapped it and began again,a terrible waste,but necessary
David,
i believe the original was a Monosteel blade rather than pattern welded.
Attachment: 51.83 KB
|
|
|
|
Hugo Voisine
|
Posted: Sat 04 Aug, 2007 2:08 pm Post subject: |
|
|
Arg ! Can't imagine what it could be to have to re-do it all over... Frustrating like being caught in a two-month traffic jam maybe...
Nevertheless, the final result is absolutely awesome. Well worth the hard work certainly.
There's gonna be a happy customer somewhere....
Edit : the fuller seems a bit different on the new blade... minor cosmetic change or is it just me ?
« Que dites-vous ?... C'est inutile ?... Je le sais !
Mais on ne se bat pas dans l'espoir du succès !
Oh ! non, c'est bien plus beau lorsque c'est inutile ! »
|
|
|
|
Peter Johnsson
Industry Professional
|
Posted: Sat 04 Aug, 2007 3:01 pm Post subject: |
|
|
Wonderful to see Rob!
This one I would very much like to see in person.
Good work
|
|
|
|
Rob Miller
Industry Professional
|
Posted: Sun 05 Aug, 2007 3:02 am Post subject: |
|
|
thank you Peter,i think i will be making a couple more now,maybe have one for you to take a look at if you come a-Viking over this way soon
Hugo,thats right,the fuller is a wee bit bigger,to fit the runes and also the blade is very slightly wider overall.
|
|
|
|
David Huggins
|
Posted: Sun 05 Aug, 2007 9:30 am Post subject: |
|
|
Thanks for the reply Rob, the sword is beautiful , the quality of the casting reminds me of Alban Depper's work.
|
|
|
|
Steve Grisetti
|
Posted: Mon 06 Aug, 2007 4:28 pm Post subject: |
|
|
Rob Miller wrote: | Hi Steve,
the first blade had a couple of small faults in the welding,so i scrapped it and began again,a terrible waste,but necessary |
Thanks for the clarification, Rob. How long does it typically take you to prepare a new pattern welded blade? I am thinking in terms of the time for you to produce the blade, not the wait time the customer experiences working his/her way to the front of your line.
Quote: | David,
i believe the original was a Monosteel blade rather than pattern welded. |
The pattern-welded blade is awfully pretty, and IMO was a good choice for this piece!
"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
|
|
|
|
Rob Miller
Industry Professional
|
Posted: Tue 07 Aug, 2007 1:26 am Post subject: |
|
|
Hi Steve.
I work from billet stock in Damascus,this is forged and ground,prior to heat treatment and the etching.faults can be very subtle, not really noticeable until the acid etching,the first billet had a number of small inclusions which 'weep' after the acid treatment,this means that the blade is to all intents and purposes ruined,with only a couple of small sections that can be redeemed for small projects.
it is an expensive material to use,and disappointing when it goes wrong,but thats one 'challenges' of the Custom maker.
|
|
|
|
Blair Guardia
|
Posted: Sat 25 Aug, 2007 3:56 pm Post subject: |
|
|
wow man.... just how the hell did you get engravings on there... O.o
|
|
|
|
|