Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Off-topic Talk > Info on hilt and pommel making Reply to topic
This is a standard topic  
Author Message
Eric G.




Location: Arizona
Joined: 08 Feb 2011
Likes: 3 pages
Reading list: 5 books

Posts: 249

PostPosted: Mon 21 Feb, 2011 3:36 pm    Post subject: Info on hilt and pommel making         Reply with quote

Hello knowledgable people,

I have been taking some time recently to design my very own sword. I have found some really great information on this site about how to make a scabbard and handle, but nothing so far on how to make a hilt or pommel. Can anyone provide me with information on how to do this? I either own or can borrow most of your basic shop tools, but don't have the skill or the means to "forge" anything.

For any of you who are interested, I am planning on using one of the Hanwei Tinker XVIIIA bare blades with a dark blue leather grip with risers. I would like a cruciform hilt (perhaps an Oakeshott type 4 or perhaps not) and a pear shaped pommel (which I believe is a variant on Oakeshott's T class pommels). I have provided some links below for examples of the pommel type.

http://www.albion-swords.com/swords/albion/ne...photos.htm
http://www.christianfletcher.com/Christian_Fl...testa.html

As always your input is very welcome!

Eric Gregersen
www.EricGregersen.com
Knowledge applied is power.
View user's profile Send private message Visit poster's website
Isaac H.




Location: Northern California
Joined: 06 Jun 2010
Likes: 32 pages
Reading list: 4 books

Posts: 143

PostPosted: Mon 21 Feb, 2011 10:34 pm    Post subject:         Reply with quote

Hello there Eric.I would agree that there is a lack of pommel and guard making info on this site.If you plan on a straight type of guard ,such as the aformentioned cruciform style,you can get away with no forging,but with lots of other manual labor,such as grinding and filing.Find a piece of steel that is roughly the size and length you want the guard to be.The worst part is making the slot for the tang to slip through.For a start,drill several holes in the guard side by side a little shorter than the tang is wide.Make sure the holes are smaller than the thickness of the tang.A drill press is best for this job.Then start with a small rounded file and and gradually file out the slot using bigger files as the slot gets larger.Once the soon-to-be guard fits snuggly on the tang shoulders ,do any shaping you want until the guard's proportions are correct.

As for pommels,it's a similar process;drill,file,shape.It is very difficult to get the pommel to seat perfectly true on the sword without professial tools and experience.The more patient you are with the process,the better the end result.I have also found that it is surprisingly hard to find a chunk of steel big enough to make a pommel(especially the type you want).That beautiful pear shape will take a great amount of time to get done,a Dremel tool might be a very good investment.

There are,of course,other methods ,such as casting ,that I didn't mention,I just wanted to get this thread rolling with a few basics on this seldom breached subject. Besides....it's my bedtime Wink

By the way..I loved your book Cool

Wounds of flesh a surgeons skill may heal...

But wounded honor is only cured with steel.

We who are strong ought to bear with the failings of the weak and not to please ourselves.
Each of us should please his neighbor for his good ,to build him up.
Romans 15:1-2
View user's profile Send private message Visit poster's website
Artis Aboltins




PostPosted: Tue 22 Feb, 2011 12:21 am    Post subject:         Reply with quote

Ragarding making a hilt - there are several ways, but for the sort of sword you have described, I think that you might find the following "how to?" guide usefull - http://www.yeoldegaffers.com/project_grip.asp.
View user's profile Send private message
Eric G.




Location: Arizona
Joined: 08 Feb 2011
Likes: 3 pages
Reading list: 5 books

Posts: 249

PostPosted: Tue 22 Feb, 2011 8:37 am    Post subject:         Reply with quote

Isaac,

Thanks for the helpful info. I was afraid that the process would require a lot of grinding... I do have a dremmel that I can borrow, but I suppose that I could also look into the details of casting - hopefully its something I can manage.

So I take it that you visited my website and read the chapters I have available there? I'm glad to hear that you like it :-) I am currently in the process of editing it so I can try and get it published. If you send me an email with your thoughts I'd be happy to email you a copy of the entire thing when I'm done with the edits. :-)

Artis.

I have actually discovered gaffer's sight recently. It was his site that got me thinking I should try and make my own furniture for my next sword. Sadly, that site doesn't give any info on how to make a pommel or a cross guard. Do you know of site that gives a walkthrough for that?

Eric Gregersen
www.EricGregersen.com
Knowledge applied is power.
View user's profile Send private message Visit poster's website
Artis Aboltins




PostPosted: Tue 22 Feb, 2011 8:48 am    Post subject:         Reply with quote

Eric - for making the crossguard I would suggest to peruse this site - we have a number of very skilled makers showing their work in progress in great detail - both in Historical Weapons subsection as well as in makers and Manufacturers subsection. I am sure you can find something you could use. Also, I would recommend taking a look at http://forums.dfoggknives.com/index.php - many people who are often here frequent that site and it is dedicated to all aspects of knife and swordmaking so there is huge amount of information that would show you how to do the parts you need.

I must admit that I also looked through the chapters you had available on your site, and it does appears that entire book might provide an interesting read. it is always nice to see when writer is really interesed in things he is writing about.
View user's profile Send private message
J.D. Crawford




Location: Toronto
Joined: 25 Dec 2006

Spotlight topics: 1
Posts: 1,903

PostPosted: Tue 22 Feb, 2011 8:52 am    Post subject:         Reply with quote

Craig Johnson of A&A has kindly shared his process for both cross and pommel, with detailed step-by-step photos, on this thread that I've been updating: http://www.myArmoury.com/talk/viewtopic.php?t=21804
View user's profile Send private message Visit poster's website
Eric G.




Location: Arizona
Joined: 08 Feb 2011
Likes: 3 pages
Reading list: 5 books

Posts: 249

PostPosted: Tue 22 Feb, 2011 12:12 pm    Post subject:         Reply with quote

Artis,

Thank you for the compliment on the book. I am more than willing to extend the same offer to you ( a fellow sword buddy) that I extended to Issac =) Also, thank you for the link. I'll have to take some time today to look over that site and see what I can find.

J.D.

Also, thanks a lot for your reference to the post. I had tried to find one like that myself here but no luck. Some of the techniques look a little too advanced for me (for example, the forge and anvil are beyond my resources at the moment) but there is still plenty there that will be helpful, especially when it comes to making the pommel out of that big chunck of metal.

Now... not to take the easy way out, but does anyone know of a vendor that will sell me just the pommel? I haven't asked any vendors specifically (yet) and I understand that the piece might not always fit, but I am interested to know if anyone has tried this before?

Eric Gregersen
www.EricGregersen.com
Knowledge applied is power.
View user's profile Send private message Visit poster's website
Artis Aboltins




PostPosted: Tue 22 Feb, 2011 12:49 pm    Post subject:         Reply with quote

You can take a look at http://www.albion-swords.com/moat.htm - Albion sells off some of their less than perfect blades and hilt furniture there, so if you are willing to do some filework/polishing you might be able to acquire a good pommel for your blade.
View user's profile Send private message
J.D. Crawford




Location: Toronto
Joined: 25 Dec 2006

Spotlight topics: 1
Posts: 1,903

PostPosted: Tue 22 Feb, 2011 12:54 pm    Post subject:         Reply with quote

Eric,

I and others have obtained pommels and crosses by 1) asking for them on the marketplace forum, 2) buying cheap whole swords and dismantling them, 3) buying them from sword makers. For the third , you are more likely to be successful with a small cottage-sized operation and with someone that you have an ongoing relationship with as a customer. Otherwise they may not want to bother with it. That's the limit of my experience!

Good luck, JD
View user's profile Send private message Visit poster's website
Eric G.




Location: Arizona
Joined: 08 Feb 2011
Likes: 3 pages
Reading list: 5 books

Posts: 249

PostPosted: Wed 23 Feb, 2011 10:12 pm    Post subject:         Reply with quote

Artis and JD

Thank you and thank you for your help and replies. Hopefully I'll be able to post pictures of the sword project in the next few months.

Eric Gregersen
www.EricGregersen.com
Knowledge applied is power.
View user's profile Send private message Visit poster's website
Matthew Stagmer
Industry Professional



Location: Maryland, USA
Joined: 23 Jan 2008

Posts: 493

PostPosted: Thu 24 Feb, 2011 5:33 am    Post subject:         Reply with quote

A lathe is crucial for some to make pommels. I myself have been teaching myself to free hand pommels on the sander from sqaure bar. Just seems like a skill I may need in hurry some days. I have got quite good. Just take your time and take a little off at a time.
Matthew Stagmer
Maker of custom and production weaponry
Youtube.com/ThatWorks
View user's profile Send private message Visit poster's website
Ron Reuter




Location: Southern Indiana
Joined: 04 Oct 2007

Posts: 56

PostPosted: Thu 24 Feb, 2011 6:02 am    Post subject:         Reply with quote

Eric,

I plan on adding my hilt (pommel and guard) project on my website one day (yeoldegaffers), but time has not been kind to me lately. I did post some very minimal directions on another site, and if you are interested you can check them out here: (the pommel on this project was purchased)

http://sbgswordforum.proboards.com/index.cgi?...read=18046

I also have a post here that shows a bit of the above again, along with how I made my peen block.

http://www.myArmoury.com/talk/viewtopic.php?t...highlight=


Hope this helps a bit.

Ron

www.yeoldegaffers.com
View user's profile Send private message Visit poster's website
Eric G.




Location: Arizona
Joined: 08 Feb 2011
Likes: 3 pages
Reading list: 5 books

Posts: 249

PostPosted: Fri 25 Feb, 2011 12:16 pm    Post subject:         Reply with quote

Ron,

Thanks so much for the links. I have actually visited your site a lot and love how complete and detailed your instructions are.

Eric Gregersen
www.EricGregersen.com
Knowledge applied is power.
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Off-topic Talk > Info on hilt and pommel making
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum