Your last sword -- myArmoury.com

D. Bell · Posted: Fri 20 Jul, 2012 8:20 pm Post subject:

After more than half a decade of waiting I have finally got my first custom sword, and it was worth the wait. It is based on a sword from the river Witham currently in Sheffield museum.

Jean Thibodeau · Posted: Sat 21 Jul, 2012 2:25 am Post subject:

D. Bell · Posted: Sat 21 Jul, 2012 5:11 am Post subject:

I have long had an interest in the Anglo-Saxons, and I am a fan of the trewhiddle style of decoration popular in 9th century England, so when I first ran across this sword in The Sword in Anglo-Saxon England I took an immediate liking to it as a fine example of the English type L sword. When I decided I wanted a pattern welded viking age sword, this was an easy choice for me, and I contacted Patrick Bárta about making a replica. I learned more about the sword from this article, and Sheffield museum was kind enough to provide a good photo which I have attached.

Stats for my sword:
Overall length 93.8cm,
Blade length 78.5cm,
Blade width 53mm,
Point of balance 150mm before the guard,
Weight 1200g.

Overall I am very pleased with this sword. There are a few minor differences between the original and the Patrick's reproduction, for example I asked Patrick to alter the middle grip ferrule after the photo I posted was taken, but when I emailed him after receiving it I called it magnificent, and I stand by that. I hope to own more of his swords in the future.

My only problem is deciding where to put it - I tried wearing it everywhere, but it turns out sitting in a chair with armrests while you have a sword strapped to your waist is impractical so I am forced to look for an alternative.

Jeremy V. Krause · Posted: Sat 21 Jul, 2012 6:30 am Post subject:

Yes Mr. Bell, that's an impressive piece,

Is that a Barta sword?

Eric W. Norenberg · Posted: Sun 22 Jul, 2012 11:04 am Post subject: Sean's hauswehr

Michel Pérusse · Posted: Mon 10 Sep, 2012 1:55 pm Post subject:

I am waiting for this to arrive from the Czech Republic:

It is a saber by Lutel (a mix between their 11005 and 11006 models).

I quite like the looks of it and can't wait to see how it performs.

Nathan Robinson · myArmoury Admin

Jean Thibodeau · Posted: Mon 10 Sep, 2012 9:55 pm Post subject:

Rich Knack · Posted: Wed 12 Sep, 2012 7:57 am Post subject:

"Crusader" arming sword by Strongblade, modified by swapping out the original pommel for the one that comes on their "Knight Protector" arming sword. This was the tempered, unsharpened model, but I was able to sharpen it with few difficulties:

Photobucket image

Blade is flexible - borderline "whippy", but not bad for a primarily cutting sword. Here are the specs:

Weight: 2 pounds, 14 oz.
POB: 6-1/4" from cross
blade length: 33 inches
COP: 11 inches from point

Not a bad sword, for the price, actually, but I'm hard put to put it into any particular Oakeshott typology.

Sean Flynt · Posted: Wed 12 Sep, 2012 8:01 am Post subject:

Eric: Sorry I missed your last post about the EBE Hauswehr. Here's the thread: http://www.myArmoury.com/talk/viewtopic.php?t...t=hauswehr

Michel Pérusse · Posted: Wed 12 Sep, 2012 12:10 pm Post subject:

Thank you Nathan, I'm glad you like it. After seeing it in "real life" and handling it, I can recommend it sincerely. I really, really like it, aesthetically and handling-wise.

Jean: Thank you. The one I got is actually the 11006 model but with the handle from the 11005 (the one at KoA). Lutel did the handle swap at my request. The 11006 sports a different -and longer- blade and, of course, a different guard. I always thought that the 11006 would benefit from being fitted with the 11005's handle. I think i was right. After you "recuperate" from the Dresden acquisition, yield to temptation!

I'll try and post my first impressions with pictures on a separate thread.

Oliver Schmid · Posted: Sun 07 Oct, 2012 4:53 am Post subject:

here are some pics from my diy project. its a german executioner sword late 17 century.
a similar is in the kriminalmuseum in rothenburg ob der tauber, germany.
i worked nearly one month on the sword.all parts are made by hand! the blade is carbon steel c75.

oli

Thomas R. · Posted: Sun 07 Oct, 2012 5:29 am Post subject:

Wow, Oliver, at first look I thought your sword was an original one! Good work!

J. Hargis · Posted: Sun 07 Oct, 2012 5:58 am Post subject: a new Albion Prince

I recently received Albion's Prince. I requested a blue leather wrap which provides a nice contrast to the bronze pommel.
The Prince is properly named. It is well built, is an incredible feeling weapon, and a sight to behold as well.
review here:
http://www.myArmoury.com/review_alb_princesquire.html

Jon

http://www.albion-swords.com/swords/albion/ne...ce-xvi.htm
Specifications
Total length: 39.25" (99.7 cm)
Blade length: 32.28" (82 cm)
Blade width: 2.25" (5.7 cm)
CoG: 4.75" (12 cm)
CoP: 20.5" (52.07 cm)
Weight: 2 lbs 6.4 oz (1.09 kilos)

Lloyd Winter · Posted: Sun 07 Oct, 2012 6:01 am Post subject:

I'll second that on the Prince. I received mine last week. No chance for pics yet but it may be my favorite single handed sword to date.

J. Hargis · Posted: Sun 07 Oct, 2012 6:07 am Post subject:

Lin Robinson · Posted: Sun 07 Oct, 2012 6:17 am Post subject:

I bought this Donnie Shearer-made Beak Nosed Ribbon hilt backsword from a fellow forumite. It is antiqued and looks great. The blade is marked with the running wolf trademark. Very impressive work and looks like a genuine antique. It also feels great in the hand.

Jeremy V. Krause · Posted: Sun 07 Oct, 2012 9:18 am Post subject:

Luka Borscak · Posted: Sun 07 Oct, 2012 1:03 pm Post subject:

J. Hargis · Posted: Sun 07 Oct, 2012 3:34 pm Post subject: