| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term. Last 10 Donors: Daniel Sullivan, Anonymous, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
Author |
Message |
Radovan Geist
|
Posted: Tue 07 Jan, 2014 5:35 am Post subject: question on a parrying dagger - sword breaker |
|
|
I´ve started to work on a parrying dagger / sword breaker, inspired by a piece in the NY Metropolitan Museum. Here is the picture from Leonid Tarassuk´s "Some Notes on Parrying Daggers and Poniards".
My question is: how was that complex hilt constructed? Pictures are not very clear, but judging from other pieces with shell-guards, I would say that shells/shields were formed separately and then riveted or forge-welded to the crossguard on its upper side (when you hold dagger with its point up). Any other ideas how could that be done?
Alternatively, do you have any other pictures of that piece?
thanks in advance.
(So far, I have cut and shaped the blade, and I´ve sent it for hardening and tempering. I will post pictures later as a DIY project.)
Attachment: 106.44 KB
|
|
|
|
Shahril Dzulkifli
|
Posted: Wed 05 Feb, 2014 9:31 am Post subject: Question on a Parrying Dagger - Swordbreaker |
|
|
Here is one example of a parrying dagger, Radovan. This one has arrow-shaped serrations on its blade. Which handle do you prefer for your new dagger? This one or the one with the clamshell guard?
“You have power over your mind - not outside events. Realize this, and you will find strength”
- Marcus Aurelius
|
|
|
|
Tim Harris
Industry Professional
Location: Melbourne, Australia Joined: 06 Sep 2006
Posts: 168
|
Posted: Wed 05 Feb, 2014 7:02 pm Post subject: |
|
|
The picture doesn't show enough detail to be sure, but there's a possibility that the shells are formed from one piece of metal and sandwiched between cross and blade or grip and cross. Screws or rivets could be used to keep it solid.
|
|
|
|
Radovan Geist
|
Posted: Wed 05 Feb, 2014 10:43 pm Post subject: |
|
|
Shahril, I´ve already started working on it, so it´s the NY MET piece. I have seen various parrying daggers of varying forms, but that one intrigued me with its complex hilt and interesting blade profile. Let´s see how it works.
Tim, that picture is quite bad indeed. I was trying to search for another one, but with no avail. Anyhow, I´ve already started working on it and I will probably use two rivets to secure the shells. I was also thinking about the possibility of both shells formed from a single sheet of metal. I´ll try to do it that way and see how it works (having one piece should surely ease the riveting to crossguard).
I will post some progress picture in another thread.
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|