Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Off-topic Talk > New Scabbard for my Towton.DIY Project Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Rod Walker




Location: NSW, Australia.
Joined: 05 Feb 2004

Posts: 230

PostPosted: Sun 08 Jan, 2006 3:49 pm    Post subject: New Scabbard for my Towton.         Reply with quote

I made this wood cored scabbard for my new Windlass Towton.

I have been re-enacting for 15 years and have never made a scabbard, this is the first one.

The parrallel risers are where the belt suspension will attach.

I still have to finish sewing up the back seam and the steel chape needs to be moved up higher and set in place.

Pretty happy with the way it came out for a first effort. Big Grin

My next project is to remove the lacquer and redo the grip.






Cheers

Rod
Jouster
www.jousting.com.au

"Come! Let us lay a lance in rest,
And tilt at windmills under a wild sky!
For who would live so petty and unblessed
That dare not tilt at something, ere he die?"
--Errantry, John Galsworthy
View user's profile Send private message Visit poster's website
Addison C. de Lisle




Location: South Carolina
Joined: 05 Nov 2005
Likes: 27 pages

Posts: 614

PostPosted: Sun 08 Jan, 2006 3:54 pm    Post subject:         Reply with quote

Great job! A few questions:

-How did you do the risers?
-Did you make the chape yourself?
-How do you decide where to attach the suspension system?
View user's profile Send private message Visit poster's website
Rod Walker




Location: NSW, Australia.
Joined: 05 Feb 2004

Posts: 230

PostPosted: Sun 08 Jan, 2006 5:03 pm    Post subject:         Reply with quote

Addison C. de Lisle wrote:
Great job! A few questions:

-How did you do the risers?
-Did you make the chape yourself?
-How do you decide where to attach the suspension system?


Thanks.

They are 3mm round cord glued to the wood.

The chape was on the leather scabbard that came with the sword. It wasn't too bad so I cleaned it up and reshaped it a little bit to fit the new scabbard.

I have been using swords for about 15years on and off horseback so I have a pretty good idea of where I like them to hang.

Cheers

Rod
Jouster
www.jousting.com.au

"Come! Let us lay a lance in rest,
And tilt at windmills under a wild sky!
For who would live so petty and unblessed
That dare not tilt at something, ere he die?"
--Errantry, John Galsworthy
View user's profile Send private message Visit poster's website
Greyson Brown




Location: Windsor, Colorado
Joined: 22 Nov 2004
Reading list: 15 books

Posts: 813

PostPosted: Sun 08 Jan, 2006 11:10 pm    Post subject:         Reply with quote

How are you going to set the chape in place? Is it just a friction fit, or do you use glue, or some other sneeky method I haven't thought of?

-Grey

"So long as I can keep the path of honor I am well content."
-Sir Arthur Conan Doyle, The White Company
View user's profile Send private message
Jean Thibodeau




Location: Montreal,Quebec,Canada
Joined: 15 Mar 2004
Likes: 50 pages
Reading list: 1 book

Spotlight topics: 5
Posts: 8,310

PostPosted: Mon 09 Jan, 2006 6:34 am    Post subject:         Reply with quote

Rod;

Well if this is your first effort it looks very professionally made to me and it is also very well designed and attractive. Cool

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Folkert van Wijk




Location: The Netherlands
Joined: 13 Sep 2004
Likes: 2 pages
Reading list: 2 books

Posts: 206

PostPosted: Tue 10 Jan, 2006 1:11 pm    Post subject: Good question!!         Reply with quote

Greyson Brown wrote:
How are you going to set the chape in place? Is it just a friction fit, or do you use glue, or some other sneeky method I haven't thought of?

-Grey


Thats definatly a good question and one I have thinking off asking also...

Someone else into scabbard making, that can answer??

A good sword will only be sharp, in the hands of a wise man…

I am great fan of everything Celtic BC, including there weapons.
View user's profile Send private message
Rod Walker




Location: NSW, Australia.
Joined: 05 Feb 2004

Posts: 230

PostPosted: Tue 10 Jan, 2006 2:15 pm    Post subject:         Reply with quote

The chape is pressure fitted. I squashed it open in the vice, inserted the scabbard tip and tapped it into place and then relesed the vice. The steel sprang back and it is very tightly fitted now.

This may not work for the next chape as I will make one from scratch in brass.

Cheers

Rod
Jouster
www.jousting.com.au

"Come! Let us lay a lance in rest,
And tilt at windmills under a wild sky!
For who would live so petty and unblessed
That dare not tilt at something, ere he die?"
--Errantry, John Galsworthy
View user's profile Send private message Visit poster's website
Greyson Brown




Location: Windsor, Colorado
Joined: 22 Nov 2004
Reading list: 15 books

Posts: 813

PostPosted: Tue 10 Jan, 2006 11:39 pm    Post subject:         Reply with quote

Thanks, I have wondered about the attachment of lockets as well. Let me know how you end up going about that if you redo that, too.

-Grey

"So long as I can keep the path of honor I am well content."
-Sir Arthur Conan Doyle, The White Company
View user's profile Send private message
Bruno Giordan





Joined: 28 Sep 2005

Spotlight topics: 1
Posts: 919

PostPosted: Wed 11 Jan, 2006 1:49 am    Post subject:         Reply with quote

i would be glad to know if theer is an internet source that teches how to work leather in this way, stitching included.
View user's profile Send private message
Folkert van Wijk




Location: The Netherlands
Joined: 13 Sep 2004
Likes: 2 pages
Reading list: 2 books

Posts: 206

PostPosted: Wed 11 Jan, 2006 3:11 am    Post subject: Thanks         Reply with quote

Thanks Rod!
I will remember that one.

Anyway i am thinking of proposing an extra thread here upon myArmoury.com, with al kind of do it your self topics.
There seam to apear more and more people here on this thread that are making verry cool, and to my oppinion verry hight qualitie, "home" projects...

And i would love to here more about the way they do that...

A good sword will only be sharp, in the hands of a wise man…

I am great fan of everything Celtic BC, including there weapons.
View user's profile Send private message
Folkert van Wijk




Location: The Netherlands
Joined: 13 Sep 2004
Likes: 2 pages
Reading list: 2 books

Posts: 206

PostPosted: Wed 11 Jan, 2006 3:13 am    Post subject:         Reply with quote

... maybe because i tend to mess up my one home projects every now and then... Laughing Out Loud Laughing Out Loud Laughing Out Loud Worried Big Grin Eek! Razz
A good sword will only be sharp, in the hands of a wise man…

I am great fan of everything Celtic BC, including there weapons.
View user's profile Send private message
Jonathan Blair




Location: Hanover, PA
Joined: 15 Aug 2005
Likes: 9 pages
Reading list: 2 books

Posts: 496

PostPosted: Wed 11 Jan, 2006 3:26 am    Post subject:         Reply with quote

Nice job on the scabbard. I just hope my future first attempt will be as successful.
"Think not that I am come to send peace on earth: I came not to send peace, but a sword." - The Lord Jesus Christ, from The Gospel According to Saint Matthew, chapter x, verse 34, Authorized Version of 1611
View user's profile Send private message
Joe Fisher




Location: Lake Hopatcong, NJ
Joined: 03 Jan 2006

Posts: 8

PostPosted: Wed 11 Jan, 2006 8:25 am    Post subject: Re: Good question!!         Reply with quote

Folkert van Wijk wrote:
Greyson Brown wrote:
How are you going to set the chape in place? Is it just a friction fit, or do you use glue, or some other sneeky method I haven't thought of?
Thats definatly a good question and one I have thinking off asking also...
Someone else into scabbard making, that can answer??

I don't know about historical accuracy, but I'm going to use hide glue for mine. For those not familiar, it's a glue made from rendered animal parts. There's even a version called mouth glue, where you chew on the animal parts to make it. It's been around forever. It's extremely strong glue, but has the drawback of being water soluble.

I'll be using Knox gelatin as the base for my glue, since I don't have any sinew or fish bladders on hand Happy

-Joe

I am an outcast, on the path of no return.
View user's profile Send private message Visit poster's website
Gordon Frye




Location: Kingston, Washington
Joined: 20 Apr 2004
Reading list: 15 books

Spotlight topics: 2
Posts: 1,191

PostPosted: Wed 11 Jan, 2006 9:29 pm    Post subject:         Reply with quote

Good Job, Rod! That scabbard looks quite nice, especially for a first attempt! Keep us posted on the suspensary system, and how it looks when it's finished and hanging off of your belt (especially how it hands while your mounted.)

Cheers!

Gordon

"After God, we owe our victory to our Horses"
Gonsalo Jimenez de Quesada
http://www.renaissancesoldier.com/
http://historypundit.blogspot.com/
View user's profile Send private message Visit poster's website Yahoo Messenger
Steve Grisetti




Location: Washington DC metro area, USA
Joined: 01 Mar 2004
Likes: 9 pages
Reading list: 28 books

Posts: 1,812

PostPosted: Fri 13 Jan, 2006 7:27 pm    Post subject:         Reply with quote

First effort? Wow. Very impressive work, Rod.
"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
View user's profile Send private message
Andrew Fox




Location: S.F. Bay Area
Joined: 25 Jan 2004

Posts: 50

PostPosted: Fri 13 Jan, 2006 9:37 pm    Post subject:         Reply with quote

That looks fantastic! I've been toying with the idea of giving my Towton a makeover in terms of a grip re-wrap and possibly a new scabbard, so I'm interested to see how your project turns out. Happy
View user's profile Send private message
Rod Walker




Location: NSW, Australia.
Joined: 05 Feb 2004

Posts: 230

PostPosted: Fri 13 Jan, 2006 11:15 pm    Post subject:         Reply with quote

Thanks for the kind words all. I didn't have any decent buckles for the belt for this scabbard so I made this one from scratch, again, this is the first buckle I've ever made Big Grin

I may not use it as I am going to make a few more and see if I can do better.



Hope to have the belt and suspension all finished this weekend.

Cheers

Rod
Jouster
www.jousting.com.au

"Come! Let us lay a lance in rest,
And tilt at windmills under a wild sky!
For who would live so petty and unblessed
That dare not tilt at something, ere he die?"
--Errantry, John Galsworthy
View user's profile Send private message Visit poster's website
Tom Carr




Location: Dallas TX
Joined: 23 Aug 2003

Posts: 148

PostPosted: Sun 15 Jan, 2006 12:24 am    Post subject:         Reply with quote

Very nice work there! Are all your first efforts as nice as these two? Cool
View user's profile Send private message MSN Messenger
Jean Thibodeau




Location: Montreal,Quebec,Canada
Joined: 15 Mar 2004
Likes: 50 pages
Reading list: 1 book

Spotlight topics: 5
Posts: 8,310

PostPosted: Sun 15 Jan, 2006 10:16 am    Post subject:         Reply with quote

Rod;

First efforts. Eek! Eek! Eek! Some people with years of experience would have trouble making something that would be so much better that we would notice it at a glance. Razz Cool

Looks like you are at at least within a stone' s throw of fully professional work. Big Grin

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
Stephen Hand




Location: Hobart, Australia
Joined: 03 Oct 2004
Reading list: 1 book

Posts: 226

PostPosted: Sun 15 Jan, 2006 3:39 pm    Post subject:         Reply with quote

Very slick work Rod.

Greyson Brown wrote:
Thanks, I have wondered about the attachment of lockets as well. Let me know how you end up going about that if you redo that, too.


Despite the fondness of sword manufacturers for putting them on every scabbard regardless of period, I'm not aware of lockets at the mouth of any scabbards before the late 17th century.

Cheers
Stephen

Stephen Hand
Editor, Spada, Spada II
Author of English Swordsmanship, Medieval Sword and Shield

Stoccata School of Defence
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Off-topic Talk > New Scabbard for my Towton.DIY Project
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum