Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Historical Arms Talk > Detail photo -- Howard Clark forge folded blade Reply to topic
This is a standard topic  
Author Message
Keith Larman
Industry Professional



Location: Sunny Southern California
Joined: 21 Aug 2003

Posts: 237

PostPosted: Sun 14 Sep, 2003 4:03 pm    Post subject: Detail photo -- Howard Clark forge folded blade         Reply with quote

Just fwiw, a detail shot of a forge folded blade by Howard Clark fully polished. Definitely different than a nihonto, but it has its own unique look.


Keith Larman
http://www.summerchild.com
View user's profile Send private message Send e-mail Visit poster's website
Ron Luciano





Joined: 21 Aug 2003

Posts: 74

PostPosted: Sun 14 Sep, 2003 4:23 pm    Post subject: Howard Clark         Reply with quote

Truly amazing work!

Ron

I have not tarried in long journeys over the surface of the sea, nor have I feared the threats of enemies or wild beasts, O strong leader, Maurice, go well good friend; I discern through such sweetness, the beauties of the country life, a safe return and nobility. Lift high the wine vessel. Such things are worthy of remembrance.

HMS ADVICE 1705
View user's profile Send private message
Robert Denbigh




Location: Connecticut
Joined: 23 Aug 2003

Posts: 20

PostPosted: Sun 14 Sep, 2003 4:23 pm    Post subject:         Reply with quote

Just out of curiosity is this the Darryl Mier stock that Howard normally uses or the folded 1086 that he has done a few times?
View user's profile Send private message Send e-mail AIM Address
Keith Larman
Industry Professional



Location: Sunny Southern California
Joined: 21 Aug 2003

Posts: 237

PostPosted: Sun 14 Sep, 2003 4:26 pm    Post subject:         Reply with quote

Robert Denbigh wrote:
Just out of curiosity is this the Darryl Mier stock that Howard normally uses or the folded 1086 that he has done a few times?


Daryl Meier

Keith Larman
http://www.summerchild.com
View user's profile Send private message Send e-mail Visit poster's website
Robert Denbigh




Location: Connecticut
Joined: 23 Aug 2003

Posts: 20

PostPosted: Sun 14 Sep, 2003 4:44 pm    Post subject:         Reply with quote

Beautiful stuff! Good thing I don't have anything else to spend money on (who needs a savings anyway....).
View user's profile Send private message Send e-mail AIM Address
Patrick Kelly




Location: Wichita, Kansas
Joined: 17 Aug 2003
Reading list: 42 books

Spotlight topics: 2
Posts: 5,739

PostPosted: Sun 14 Sep, 2003 4:53 pm    Post subject:         Reply with quote

Looks awfully rough to me. I bet a nice 100 grit emery cloth would take all of those nasty squiggles and ripples out Eek!

All kidding aside, neat stuff, just neat as all get out.
View user's profile Send private message AIM Address
Keith Larman
Industry Professional



Location: Sunny Southern California
Joined: 21 Aug 2003

Posts: 237

PostPosted: Sun 14 Sep, 2003 5:19 pm    Post subject:         Reply with quote

Patrick Kelly wrote:
Looks awfully rough to me. I bet a nice 100 grit emery cloth would take all of those nasty squiggles and ripples out Eek!

All kidding aside, neat stuff, just neat as all get out.


Yeah, that would work... Wink A nice angle grinder works well too...

Thanks, guys. I just polish 'em. Howard (and Daryl) makes 'em.

Keith Larman
http://www.summerchild.com
View user's profile Send private message Send e-mail Visit poster's website
Nathan Robinson
myArmoury Admin


myArmoury Admin

PostPosted: Sun 14 Sep, 2003 6:04 pm    Post subject: Re: Detail photo -- Howard Clark forge folded blade         Reply with quote

Keith Larman wrote:
Just fwiw, a detail shot of a forge folded blade by Howard Clark fully polished. Definitely different than a nihonto, but it has its own unique look.

As you mention, this is quite unique and perhaps defined by modern materials and techniques.. but I'm curious, with this particular example, is there any historic/ traditional terminology to define such patterns? Or must you combine multiple terms when attempting to describe it?

.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
View user's profile Send private message Send e-mail Visit poster's website
Keith Larman
Industry Professional



Location: Sunny Southern California
Joined: 21 Aug 2003

Posts: 237

PostPosted: Sun 14 Sep, 2003 9:43 pm    Post subject: Re: Detail photo -- Howard Clark forge folded blade         Reply with quote

Nathan Robinson wrote:
Keith Larman wrote:
Just fwiw, a detail shot of a forge folded blade by Howard Clark fully polished. Definitely different than a nihonto, but it has its own unique look.

As you mention, this is quite unique and perhaps defined by modern materials and techniques.. but I'm curious, with this particular example, is there any historic/ traditional terminology to define such patterns? Or must you combine multiple terms when attempting to describe it?


Some stuff, sure. It has a *very* tight itame hada. And I would also venture to say that it has a notare-eque hamon with some hataraki and pronounced ashi. But many of the activities Howard gets in some blades really don't have equivalents in the nihonto world and I hesitate to use the same words. If the blade was made from tamahagane, the composition would obviously be dramatically different. And with lower carbon levels. Japanese smiths usually use a heat treating method with temps, etc. that would probably result in instant fractures of the very high carbon levels guys like Howard uses. But his control over it, his ability to get incredibly tiny grain, and his ability to get it drawn back fast enough to prevent that failure results in a stiffer, harder, and more resilient blade in many respect. The edge holding of his blades is astounding. If he was using lower carbon steel we'd be seeing things like larger crystal, a thicker and more consistent habuchi most likely, and a variety of other things. Also the methodology of folding the steel in the manner that it is done also affects the appearance of hada. Once you know what you're looking at there's no mistaking one for the other.

So. With all that said. Apples and oranges. Some terms apply quite handily to Howard's work. Many other aspects defy traditional categories. As a result some don't like the work. That's fine. But you can't argue the performance either.

I'm finishing up the blade i had posted pics of in an earlier thread where it was in kaisei stone I believe. I'm finishing the burnish tomorrow and if I have time I"m taking some photos. San mai blade. Much more traditional looking. Very Howard as well. But more a traditional appearance. The blade pictured in this thread was pushing towards hitatsura as well with hardening pushing up into the shinogi-ji and mune (back of the blade essentially). Really Howard pushed the limits of the steel on that blade. Something he likes to do being a control freak and all. In a good way of course. Wink

Saw your pm here and noticed on my caller id that you called earlier, Nathan. Sorry, but I had the phone on the machine as I'm behind and have been trying to catch up when I can. So I was in the workshop with the ringer off, Pink Floyd on full crank, working my fingers off.

Keith Larman
http://www.summerchild.com
View user's profile Send private message Send e-mail Visit poster's website


Display posts from previous:   
Forum Index > Historical Arms Talk > Detail photo -- Howard Clark forge folded blade
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum