Author |
Message |
Nate C.
|
Posted: Sat 28 Mar, 2009 10:31 pm Post subject: |
|
|
Wow,
Very nice blade . To be honest, I'll have to reserve judgement on the completed sword until the hilt and blade are together. My mind's eye currently rebels at that blade being on anything but a Swiss (German?) saber. Regardless it should be a very unique piece.
Cheers,
Nate C.
Sapere Aude
"If you are going to kill the man, at least give him a decent salute." - A. Blansitt
If they ever come up with a Swashbuckling School, I think one of the courses should be Laughing, then Jumping Off Something. --Jack Handy
|
|
|
|
Kirk Lee Spencer
|
Posted: Sun 29 Mar, 2009 7:37 am Post subject: |
|
|
Nate C. wrote: | Wow,
Very nice blade . To be honest, I'll have to reserve judgement on the completed sword until the hilt and blade are together...
Cheers, |
I know what you mean Nate...
I had the same reservations. It took me about 6 months to finally convince myself. It certainly will be a unique piece. However the blade and basket did exist at the same time on planet earth
Here is a photoshoped image I put together....
take care
ks
Attachment: 29.22 KB
Two swords
Lit in Eden’s flame
One of iron and one of ink
To place within a bloody hand
One of God or one of man
Our souls to one of
Two eternities
|
|
|
|
David Wilson
Location: In a van down by the river Joined: 23 Aug 2003
Posts: 802
|
Posted: Sun 29 Mar, 2009 2:30 pm Post subject: |
|
|
Here's my EB Erickson Beak-nosed Ribbon-hilt broadsword... very broadsword....
(forgive the crappy pictures... I'm not too good...)
Attachment: 71.71 KB
Attachment: 88.75 KB
David K. Wilson, Jr.
Laird of Glencoe
Now available on Amazon: Franklin Posner's "Suburban Vampire: A Tale of the Human Condition -- With Vampires" https://www.amazon.com/dp/B072N7Y591
|
|
|
|
Carl Massaro
|
Posted: Sun 29 Mar, 2009 10:50 pm Post subject: |
|
|
E.B Erickson is a genius.
Is he still making hilts and swords? Do I need to supply the blade in order to get one of his complete pieces?
|
|
|
|
Chris Goerner
|
Posted: Mon 30 Mar, 2009 3:32 am Post subject: |
|
|
Here are my ElJay swords: A Stirling basket hilt based on one in the Edinburgh museum mounted on a custom Del Tin blade. The other is a British grenadier's hanger reproduced from one in Neumann's Swords and Blades of the American Revolution. It is mounted on an old "Hadley" made for Colonial Williamsburg back in the 1970's.
Chris
Attachment: 32.61 KB
Attachment: 52.69 KB
Attachment: 37.54 KB
Attachment: 52.89 KB
Sic Semper Tyranus
|
|
|
|
Christopher Ron Covington
|
Posted: Mon 30 Mar, 2009 8:54 am Post subject: |
|
|
Hello all,
I own a basket hilt made by ElJay. I'm not much of a photographer and I'm not good with digital cameras. I took this photo on my cell phone. The basket is mounted on a 19th century (maybe earlier) broadsword blade. The knuckle bow was made extra wide to have my personal coat of arms (granted in South Africa) applied to it. I still haven't found anyone to add the arms, but I'm sure I will one day. The grip is wood knotwork like on a dirk hilt. I'm sorry the photos suck, but it was the best I could do with a cell phone.
The sketches he sent over to me with some of his thoughts and ideas are works of art themselves. I feel very lucky to own this sword and very lucky to have gone through the process of working with ElJay.
Best regards,
Chris
Attachment: 87.74 KB
Attachment: 57.84 KB
Christopher R. Covington
|
|
|
|
Colin F.
|
Posted: Mon 30 Mar, 2009 11:52 am Post subject: |
|
|
Kirk Lee Spencer wrote: | Good spot on the pommel. You're exactly right. It's the Bolling Hall pommel. In speaking with Ejlay on the design, I wanted a different pommel and I thought that the forward part of the guard had been smashed in and orginallyy it allowed for the fore finger to extend through the front of the basket and under the forte of the blade. Eljay graciously agreed to make something similar to the Bolling Hall find. And in the end I will decorate it with the Bolling Hall as inspiration. |
If you need any more help with the Bolling Hall sword (or swords for that matter, there are a few there), I live about 10 minutes away from the Hall itself.
Colin
Melchett - "In short, a German spy is giving away every one of our battle plans."
Cpt. Darling - "You look surprised, Blackadder."
Edmund - "I cerainly am, sir. I didn't realise we had any battle plans."
|
|
|
|
Kirk Lee Spencer
|
Posted: Mon 30 Mar, 2009 1:20 pm Post subject: |
|
|
Hey Colin...
Thanks so much for the offer. I might take you up on that when I get closer to finishing it out.
take care
ks
Two swords
Lit in Eden’s flame
One of iron and one of ink
To place within a bloody hand
One of God or one of man
Our souls to one of
Two eternities
|
|
|
|
Nathan Robinson
myArmoury Admin
|
Posted: Mon 30 Mar, 2009 1:27 pm Post subject: |
|
|
Christopher Ron Covington wrote: | I own a basket hilt made by ElJay. |
Thank you, Chris, for sharing this with us! I don't think I've seen this one posted anywhere before. I like the blackening. Nice touch. I'd love to see an overall shot if you ever get a chance to photograph it. The addition of the authentic blade makes it that much sweeter.
.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
|
|
|
|
Christopher Ron Covington
|
Posted: Mon 30 Mar, 2009 4:01 pm Post subject: |
|
|
Hi Nathan et al,
Nope you haven't seen it anywhere else except maybe my page on the Broadsword League where I just added it a week or two ago. I'll try to get better photos to do it justice. If I ever find someone to do it I want to have my arms applied in silver, so I thought the blackened hilt would look striking. The antique blade just makes it that much cooler. The sword was intended to be for posterity, an heirloom piece. I think it came together well.
Best regards,
Chris
Christopher R. Covington
|
|
|
|
Nathan Robinson
myArmoury Admin
|
Posted: Mon 30 Mar, 2009 4:10 pm Post subject: |
|
|
Chris Goerner wrote: | Here are my ElJay swords: A Stirling basket hilt based on one in the Edinburgh museum mounted on a custom Del Tin blade. The other is a British grenadier's hanger reproduced from one in Neumann's Swords and Blades of the American Revolution. It is mounted on an old "Hadley" made for Colonial Williamsburg back in the 1970's |
Chris, that pair is stunning. I especially like the appearance of the scabbards and the basket liner you added.
.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
|
|
|
|
Chris Goerner
|
Posted: Mon 30 Mar, 2009 4:56 pm Post subject: |
|
|
Nathan Robinson wrote: | Chris Goerner wrote: | Here are my ElJay swords: A Stirling basket hilt based on one in the Edinburgh museum mounted on a custom Del Tin blade. The other is a British grenadier's hanger reproduced from one in Neumann's Swords and Blades of the American Revolution. It is mounted on an old "Hadley" made for Colonial Williamsburg back in the 1970's |
Chris, that pair is stunning. I especially like the appearance of the scabbards and the basket liner you added. |
Thanks, Nathan. I was surprised when I added the basket liner just how much it changed the overall appearance of the sword. It looks much better in person than in the photos (oh how I wish I had your talent with a camera!), and yet I am still torn as to whether I like the looks of the sword better with it, or without it. Since I believe the original had a liner, I have opted to keep it. And appearance aside, it feels better in hand with the liner in place.
I based the scabbard decorations on originals from the period. When I started doing research on period pieces, I was a bit surprised to see how often they were decorated with repeating embossed or carved designs. Now my other scabbards look naked to my eye in comparison.
Thanks for starting this thread. You and I have spoken before on how ElJay is able to capture the look and feel of original pieces in a way that goes beyond a purely technical accuracy into the realm of artistry. It is great to see all the varied pieces ElJay has produced.
Sic Semper Tyranus
|
|
|
|
Henrik Bjoern Boegh
Location: Agder, Norway Joined: 03 Mar 2004
Posts: 386
|
Posted: Tue 31 Mar, 2009 3:43 am Post subject: |
|
|
Christopher Ron Covington wrote: | I own a basket hilt made by ElJay. |
Chris, I must congratulate you! That's probably one of the finest "conventional" style basket hilt I've seen for years. Stunning!
Did Eljay carve the handle as well?! I'm VERY impressed!
If you the chance to take more photos, I'm also interested in seeing them.
Cheers,
Henrik
Constant and true.
|
|
|
|
Thom R.
|
Posted: Thu 22 Oct, 2009 10:35 am Post subject: |
|
|
This is my new ElJay baskethilt (new to me) mounted with a backsword blade by John Lundemo. Just arrived yesterday. ElJay nicknamed this Walter Allan basket "the football hilt", it is in Mazansky and is part of the collection at the Chicago Institute of Art. Original probably made sometime between the '15 and the '45. tr
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
Christopher Gregg
|
Posted: Thu 22 Oct, 2009 10:57 am Post subject: |
|
|
Yessiree! That's why I hang onto this board (among other reasons)! Outstanding work, and I'm VERY jealous, Thom. I haven't any of Eljay's pieces in my collection, but I know what I'll be ordering when things turn around. I simply LOVE Allen hilt swords - the artistry is sooo beautiful. Bravo!
Christopher Gregg
'S Rioghal Mo Dhream!
|
|
|
|
Chris Goerner
|
Posted: Thu 22 Oct, 2009 2:13 pm Post subject: |
|
|
Thom,
That is truly stunning.
I think that has to be my favorite Stirling hilt, and ElJay did an absolutely wonderful job in recreating it. I really like the blade you have mounted it on as well -- good choice!
There aren't many swords I am envious of, but this one is definitely at the top of the list!
Chris
Sic Semper Tyranus
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
David Wilson
Location: In a van down by the river Joined: 23 Aug 2003
Posts: 802
|
|
|
|
|