Author |
Message |
Chuck Russell
|
Posted: Fri 08 Jan, 2010 2:13 pm Post subject: |
|
|
i have to get a pic of all of mine. think theres 24
|
|
|
|
Felix R.
|
Posted: Sat 09 Jan, 2010 2:38 am Post subject: |
|
|
That is a bunch of hats you two have. Mine are only three. Well, considered I only have one head, three are already overkill.
Here´s my Wallace A74 interpretation with the Stibbert Klappvisier by Jiri Klepac.
Attachment: 74.68 KB
Attachment: 99.05 KB
|
|
|
|
J.D. Crawford
|
Posted: Sat 09 Jan, 2010 5:29 am Post subject: |
|
|
Cool - thanks guys, but I know there's lots more out there.
|
|
|
|
Tony Peterson
|
Posted: Sat 09 Jan, 2010 8:29 pm Post subject: |
|
|
Since I sold my other helm... this is now my one and only!
Attachment: 74.07 KB
[ Download ]
Cancel the kitchen scraps for lepers and orphans, no more merciful beheadings, and call off Christmas!
The time of heroes is dead: the christ god has killed it, leaving nothing but weeping martyrs and fear and shame.
If we die... it will be for GLORY, not gold.
|
|
|
|
T. Hamilton
Location: United States Joined: 30 Dec 2009
Posts: 85
|
Posted: Mon 11 Jan, 2010 1:46 pm Post subject: |
|
|
Here's mine. I got through MRL back in '93 (Catalog #29). It says "Hand made from 4 pieces of 16 gauge steel by expert craftsmen in the U.S." I've always been pleased with it, though couldn't imagine actually fighting in the confining thing! Just curious: as this was pre-Windlass, does anyone know who these "expert craftsmen" were?
Attachment: 67.06 KB
|
|
|
|
Norbert Keller
Location: Hungary Joined: 23 Apr 2009
Posts: 44
|
Posted: Thu 04 Feb, 2010 11:56 pm Post subject: |
|
|
Hi there,
here is my helm. It has just finished, made by Máté Bánsághi. It fits well, and I love it .
Attachment: 46.56 KB
Attachment: 36.4 KB
Attachment: 44.67 KB
Attachment: 40.25 KB
|
|
|
|
Robert S. Haile
|
Posted: Fri 05 Feb, 2010 1:08 am Post subject: |
|
|
Already posted this thing around a few times...but I can't resist.
|
|
|
|
Robert S. Haile
|
Posted: Fri 05 Feb, 2010 1:11 am Post subject: |
|
|
Scott Hrouda wrote: | My new GDFB bascinet. I've added the aventail, hinge pin chains, custom liner (SCA), chin strap (SCA), and visor retaining strap. |
I'm pretty impressed with this. I have a friend who's eyeballing a GDFB bascinet , and I do believe this just convinced him.
|
|
|
|
Scott Hrouda
|
Posted: Fri 05 Feb, 2010 6:15 am Post subject: |
|
|
Robert S. Haile wrote: | I'm pretty impressed with this. I have a friend who's eyeballing a GDFB bascinet , and I do believe this just convinced him. |
It's a functional helm at a great price. Unless your friend has a tiny head, he MUST purchase the large version to allow for proper padding.
My only regret is that I don't have the funds to purchase a truly beautiful, custom fitted helm. I purchased what I could, and modified it in order to both dress it up and make it more functional.
...and that, my liege, is how we know the Earth to be banana shaped. - Sir Bedevere
|
|
|
|
Matthew Amt
|
Posted: Fri 05 Feb, 2010 7:08 am Post subject: |
|
|
Wow, LOTS of great hats, here! Have to add my latest baby, just finished a few days ago (though I still have to get horsehair for the plume):
Enjoy!
Matthew
|
|
|
|
Norbert Keller
Location: Hungary Joined: 23 Apr 2009
Posts: 44
|
Posted: Fri 05 Feb, 2010 9:29 am Post subject: |
|
|
Hi!
Wow, this is a great one. Very nice helm
|
|
|
|
Sander Marechal
|
Posted: Sat 06 Feb, 2010 1:29 am Post subject: |
|
|
Fantastic helmet Matthew. I've been following your "making of" thread on the Armour Archive with great pleasure!
|
|
|
|
Nat Lamb
|
Posted: Sat 06 Feb, 2010 5:22 am Post subject: |
|
|
Nice helmet, really like some of the detail, but I think you might need to see a dermatologist... your skin looks terrible in that shot
|
|
|
|
Arek Przybylok
Location: Upper Silesia Joined: 16 Jan 2007
Posts: 112
|
|
|
|
Stuart Thompson
Location: Walton-on-the-Naze Joined: 15 Feb 2010
Posts: 118
|
Posted: Thu 25 Feb, 2010 3:32 am Post subject: |
|
|
Great helms! I'll have to post when I get my new one. Oh..I thought I spotted an Uruk-Hai helm in there somewhere.
|
|
|
|
Ben van Koert
|
Posted: Fri 07 May, 2010 5:46 am Post subject: |
|
|
I've already posted this image (among others) in another topic, but a myArmoury member suggested I should post a photo here too.
Here's my new sallet, by Albert Collins, in the mail to me now. I think he did a great job, judging on the photos he sent me.
|
|
|
|
David Clark
|
Posted: Fri 07 May, 2010 10:01 pm Post subject: |
|
|
Here is my Valsgarde 6 helm made from the Zweihammer kit with the help of a local armourer.
It was made for SCA, thus some of the unhistorical parts (face plate, etc)
|
|
|
|
Scott Hrouda
|
Posted: Sun 09 May, 2010 9:26 am Post subject: |
|
|
Very nice David! Unfortunately, SCA regulations require us to compromise historical accuracy with passing inspection. Your helm has a nice balance!
How was your experience with Zweihammer Amoury? I have a very good friend interested in their "Topfhelm (Crusader) Helmet Kit", and would like to pass along your impressions.
...and that, my liege, is how we know the Earth to be banana shaped. - Sir Bedevere
|
|
|
|
Nils Anderssen
Location: Drammen, Norway Joined: 08 Dec 2005
Posts: 61
|
Posted: Sun 09 May, 2010 11:22 am Post subject: |
|
|
My new thirteenth/fourtheenth century norwegian kettle hat made by Albert Collins.
This one is mainly inspired by one of two helmets found in Bejarn (Lofoten, Norway), but also has features seen on similar helmets found in other parts of Norway.
There are in total 7 similar helmets in Norway and one in Sweden. They look like they are made by the same craftsman, or atleast heavely inspired by eachother and feature the same overall look, construction and decoration.
Im extremly pleased with how this helmet turned out. It has a very realistik feel to it without beeing sloppy with finnish and details, that prety close to the originals (or what's left of them). It looks like its made by a really skilled craftsman in a short amount of time. After seeing several of the helmets in museums it really feels like it's "one of them".
Also... this is the first time in ten years I have ordered a custom piece that have been finnished in time
Attachment: 145.2 KB
The brim of the helmet is actually prety thin, but is folded down so it looks thicker. Probably to add strength.
Attachment: 216.33 KB
A nice little detail here is that the "cross" part of the helmet is thicker on the top. This is actually only at the edges, and not at the middle of the "cross".
Attachment: 194.85 KB
Inspired by the heavely fragmented cheekguards on another helmet found at Bejarn.
Attachment: 24.73 KB
The original helmet, now kept at the Universitymuseum in Tromsř.
Attachment: 18 KB
Decoration on the side of another helmet found in Ringsaker, Hedemark, Norway. I plan to add these to my helmet (therfore the holes on the side).
|
|
|
|
David Clark
|
Posted: Sun 09 May, 2010 8:07 pm Post subject: |
|
|
Scott Hrouda wrote: | Very nice David! Unfortunately, SCA regulations require us to compromise historical accuracy with passing inspection. Your helm has a nice balance!
How was your experience with Zweihammer Amoury? I have a very good friend interested in their "Topfhelm (Crusader) Helmet Kit", and would like to pass along your impressions. |
Thank you for the compliment!
As to your question, my experience with Zweihammer was a good one. My kit arrived in a timely manner and the parts were of great quality. If you or someone you know is good with armouring, the Valsgarde kit can be put together in one day. Mine was (along with a healthy amount of swearing!) As to the topfhelm, I know two fighters who have one of Zweihammer's Topfhelms. They are VERY impressive and imposing looking in real life. Both of the fighters who use them seem to love them too. Zweihammer's helm kits are very sturdy once put together, though somewhat heavy. Hope that helps.
|
|
|
|
|