Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Good buy? Reply to topic
This is a standard topic  
Author Message
Mathias Andersson




Location: Uppsala, Sweden
Joined: 31 Oct 2005
Reading list: 1 book

Posts: 55

PostPosted: Thu 09 Mar, 2006 12:49 pm    Post subject: Good buy?         Reply with quote

Hi , i was asked if i wanted to buy one of the Lord of the Rings sword replicas, itīs the Strider Ranger sword, the seller wanted 95$ for it? Anybody who knows anything about these swords? Is it a good buy?
Itīs only for wall decoration, but i donīt want to hang a uselles sword on my wall....
View user's profile Send private message Send e-mail MSN Messenger
G. Scott H.




Location: Arizona, USA
Joined: 22 Feb 2005

Posts: 410

PostPosted: Thu 09 Mar, 2006 12:57 pm    Post subject:         Reply with quote

If it's the officially-licensed United Cutlery version, then those go for about $150-175 USD on the internet, so $95 is fair if the sword is in good condition. As far as not wanting to hang a useless sword on your wall, the sword you are talking about (if it's the UC version) is made for display only and has a 420 stainless steel blade and rat-tail tang, so it isn't in any way a "usable" sword. Happy
View user's profile Send private message
Mathias Andersson




Location: Uppsala, Sweden
Joined: 31 Oct 2005
Reading list: 1 book

Posts: 55

PostPosted: Thu 09 Mar, 2006 1:07 pm    Post subject:         Reply with quote

Thanks for the info:) I will think it over if to buy it. Iīm saving up for an Albion Talhoffer, so the money may be better saved Wink
View user's profile Send private message Send e-mail MSN Messenger
Craig Peters




PostPosted: Thu 09 Mar, 2006 2:11 pm    Post subject:         Reply with quote

I think its safe to say that almost without question, any swords made as replicas of those seen in movies are useless.
View user's profile Send private message
Roger Hooper




Location: Northern California
Joined: 18 Aug 2003
Likes: 1 page

Spotlight topics: 4
Posts: 4,393

PostPosted: Thu 09 Mar, 2006 2:49 pm    Post subject:         Reply with quote

If you want a functional Strideresque sword, how about the ATrim Borderwatch over at http://www.christianfletcher.com ? It sells for a lot more than the one from United Cutlery, but quality and functionality cost more.
View user's profile Send private message
Paul Watson




Location: Upper Hutt, New Zealand
Joined: 08 Feb 2006

Posts: 395

PostPosted: Thu 09 Mar, 2006 2:58 pm    Post subject:         Reply with quote

I have a few of these, they're what got me started with swords. I've now progressed to only spending money on real swords. I don't have the Ranger Sword but I've held one, it weighs 4lb-8oz, no distal taper, false edged, looks good as far as a wall hanger goes. It is purely decorative. My 2cents-save your money for the real steel.
I do not love the bright sword for its sharpness, but that which it protects. (Faramir, The Two Towers)
View user's profile Send private message
David Quivey




Location: Davis, California
Joined: 01 Oct 2003
Reading list: 21 books

Posts: 79

PostPosted: Thu 09 Mar, 2006 4:36 pm    Post subject:         Reply with quote

Interestingly enough, the UC version of the "Strider" sword doesn't have a traditional rat tail tang, or at least so I've been told


 Attachment: 25.61 KB
UC_Strider.jpg

View user's profile Send private message MSN Messenger
Steve Grisetti




Location: Washington DC metro area, USA
Joined: 01 Mar 2004
Likes: 9 pages
Reading list: 28 books

Posts: 1,812

PostPosted: Thu 09 Mar, 2006 4:45 pm    Post subject:         Reply with quote

Craig Peters wrote:
I think its safe to say that almost without question, any swords made as replicas of those seen in movies are useless.

Exceptions will be those found on Albion's Filmswords site.
Also, the Windlass Kingdom of Heaven line doesn't look too bad, for the price.

"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
View user's profile Send private message
G. Scott H.




Location: Arizona, USA
Joined: 22 Feb 2005

Posts: 410

PostPosted: Thu 09 Mar, 2006 6:21 pm    Post subject:         Reply with quote

David Quivey wrote:
Interestingly enough, the UC version of the "Strider" sword doesn't have a traditional rat tail tang, or at least so I've been told


I stand corrected. That looks beefier than I would have expected; however, you still don't want to swing around a 4 lb. stainless decorative sword with what appears to be about a 3/16" thick, half -threaded (only threaded on two sides from what I can see in the pic) nub holding the whole thing together. Eek!
View user's profile Send private message
Jean Thibodeau




Location: Montreal,Quebec,Canada
Joined: 15 Mar 2004
Likes: 50 pages
Reading list: 1 book

Spotlight topics: 5
Posts: 8,310

PostPosted: Thu 09 Mar, 2006 6:43 pm    Post subject:         Reply with quote

G. Scott H. wrote:
David Quivey wrote:
Interestingly enough, the UC version of the "Strider" sword doesn't have a traditional rat tail tang, or at least so I've been told


I stand corrected. That looks beefier than I would have expected; however, you still don't want to swing around a 4 lb. stainless decorative sword with what appears to be about a 3/16" thick, half -threaded (only threaded on two sides from what I can see in the pic) nub holding the whole thing together. Eek!


Also, the guard and pommel are made of mystery metal as far as I know: Probably some form of zinc alloy only O.K. on a purely decorative piece.

Anybody know exactly what is used for guards by United Cutlery for fantasy pieces ? Sorry if a bit off topic.

Oh, saving for an Albion seems like a better idea. Big Grin

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
G. Scott H.




Location: Arizona, USA
Joined: 22 Feb 2005

Posts: 410

PostPosted: Thu 09 Mar, 2006 7:17 pm    Post subject:         Reply with quote

Jean Thibodeau wrote:


Also, the guard and pommel are made of mystery metal as far as I know: Probably some form of zinc alloy only O.K. on a purely decorative piece.

Anybody know exactly what is used for guards by United Cutlery for fantasy pieces ? Sorry if a bit off topic.



Zinc alloy would be my guess for pretty much all the hilt furniture on UC's pieces: cheap, low melting point, supposedly offers very even casting properties, etc. Question Happy

P.S. My casting experience is limited to bullets, so I could be wrong, but it seems a logical enough guess...
View user's profile Send private message
David Quivey




Location: Davis, California
Joined: 01 Oct 2003
Reading list: 21 books

Posts: 79

PostPosted: Thu 09 Mar, 2006 9:22 pm    Post subject:         Reply with quote

Heck no, neither would I. I noticed the flat sides on the threads as well - looks like a major comprimise even with the thicker tang. Still, it's an interesting thing for UC to even bother with.

G. Scott H. wrote:
I stand corrected. That looks beefier than I would have expected; however, you still don't want to swing around a 4 lb. stainless decorative sword with what appears to be about a 3/16" thick, half -threaded (only threaded on two sides from what I can see in the pic) nub holding the whole thing together. Eek!
View user's profile Send private message MSN Messenger
Steve Grisetti




Location: Washington DC metro area, USA
Joined: 01 Mar 2004
Likes: 9 pages
Reading list: 28 books

Posts: 1,812

PostPosted: Fri 10 Mar, 2006 3:26 pm    Post subject:         Reply with quote

G. Scott H. wrote:
Jean Thibodeau wrote:
Also, the guard and pommel are made of mystery metal as far as I know: Probably some form of zinc alloy only O.K. on a purely decorative piece.

Anybody know exactly what is used for guards by United Cutlery for fantasy pieces ? Sorry if a bit off topic.

Zinc alloy would be my guess for pretty much all the hilt furniture on UC's pieces....

I wonder about the quality of the UC Lord of the Rings "Museum Collection", which I noticed while browsing at Kult of Athena. The copy says: "...The full tang blades are forged from high carbon Toledo steel, made in Spain. The hilts are crafted utilizing precious metals, high quality woods, and top grain leathers...." As an example, see this Museum Collection version of Gandalf's Glamdring. Of course, at US$530, this one is pretty pricey, and getting into Albion/A&A territory.

"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
View user's profile Send private message
G. Scott H.




Location: Arizona, USA
Joined: 22 Feb 2005

Posts: 410

PostPosted: Fri 10 Mar, 2006 3:45 pm    Post subject:         Reply with quote

Quote:
The solid metal guard and pommel are plated in genuine silver with a weathered and distressed finish to replicate the actual movie prop

WTF?! Yes, but what KIND of solid metal?! Advertising can be so frustrating at times... Eek! Laughing Out Loud These may be of better quality than their run of the mill LOTR swords, but, to expand on what Steve said, for the price you're already into Atrim and some Tinker territory and nearing the lower end of Albion and A&A prices, so...... Happy


Last edited by G. Scott H. on Fri 10 Mar, 2006 3:47 pm; edited 1 time in total
View user's profile Send private message
Paul Watson




Location: Upper Hutt, New Zealand
Joined: 08 Feb 2006

Posts: 395

PostPosted: Fri 10 Mar, 2006 3:46 pm    Post subject:         Reply with quote

Steve Grisetti wrote:
G. Scott H. wrote:
Jean Thibodeau wrote:
Also, the guard and pommel are made of mystery metal as far as I know: Probably some form of zinc alloy only O.K. on a purely decorative piece.

Anybody know exactly what is used for guards by United Cutlery for fantasy pieces ? Sorry if a bit off topic.

Zinc alloy would be my guess for pretty much all the hilt furniture on UC's pieces....

I wonder about the quality of the UC Lord of the Rings "Museum Collection", which I noticed while browsing at Kult of Athena. The copy says: "...The full tang blades are forged from high carbon Toledo steel, made in Spain. The hilts are crafted utilizing precious metals, high quality woods, and top grain leathers...." As an example, see this Museum Collection version of Gandalf's Glamdring. Of course, at US$530, this one is pretty pricey, and getting into Albion/A&A territory.


It's only getting into this territory price wise Steve. The Museum Collection swords are claimed to be fully functional by UC. I do not have the MC Glamdring myself but people who do say the blade edge does not have functional edge geometry and there is no distal taper in the blade. There have been instances of the swords arriving to customers with pronounced bends in the blade. This is information I have seen written by others with photos to support, but with these issues I think you can make your own assumption about the functionality of these blades.

I do not love the bright sword for its sharpness, but that which it protects. (Faramir, The Two Towers)
View user's profile Send private message
Steve Grisetti




Location: Washington DC metro area, USA
Joined: 01 Mar 2004
Likes: 9 pages
Reading list: 28 books

Posts: 1,812

PostPosted: Fri 10 Mar, 2006 3:52 pm    Post subject:         Reply with quote

Paul Watson wrote:
...but with these issues I think you can make your own assumption about the functionality of these blades.
But, with the glassed-in wooden cases, I imagine that they function quite well as wallhangers for LOTR fans. Laughing Out Loud
"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
View user's profile Send private message
Craig Peters




PostPosted: Fri 10 Mar, 2006 6:56 pm    Post subject:         Reply with quote

Steve Grisetti wrote:
Craig Peters wrote:
I think its safe to say that almost without question, any swords made as replicas of those seen in movies are useless.

Exceptions will be those found on Albion's Filmswords site.
Also, the Windlass Kingdom of Heaven line doesn't look too bad, for the price.


Maybe Steve, but I don't think the Albion Filmswords are intended for anything other than decoration. They're certainly not made primarily with the intent to handle well. I can't speak regarding The Kingdom of Heaven, so perhaps you might be right.
View user's profile Send private message
Steve Grisetti




Location: Washington DC metro area, USA
Joined: 01 Mar 2004
Likes: 9 pages
Reading list: 28 books

Posts: 1,812

PostPosted: Fri 10 Mar, 2006 7:20 pm    Post subject:         Reply with quote

Craig Peters wrote:
...but I don't think the Albion Filmswords are intended for anything other than decoration. They're certainly not made primarily with the intent to handle well....
Well, I haven't personally handled anything available for sale on that site. And certain pieces, like those of the Conan series, probably only handle well if you're built like Arnold in his prime. But I assumed (dangerous word, I know) that other pieces, such as those from Timeline, would be more typical of other Albion pieces in their functionality. And then, there are also the Del Tin pieces, whose handling, from what I have read, probably ranges from good to bad, depending on the model.
"...dismount thy tuck, be yare in thy preparation, for thy assailant is quick, skilful, and deadly."
- Sir Toby Belch
View user's profile Send private message


Display posts from previous:   
Forum Index > Off-topic Talk > Good buy?
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum