| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term. Last 10 Donors: Daniel Sullivan, Anonymous, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
Author |
Message |
Christian Callender
Location: Maryland Joined: 28 Mar 2005
Posts: 19
|
Posted: Sun 12 Oct, 2008 9:44 am Post subject: |
|
|
I'd still love to see some pics of these projects, as well as any ideas as to how to best strip the original paint and blue the axe heads.
|
|
|
|
Klaus Gimm
Location: Germany Joined: 08 Aug 2008
Posts: 62
|
Posted: Tue 14 Oct, 2008 10:56 am Post subject: |
|
|
Great work.
I agree you should get a reference fee.
I just ordered one as well :o)
Regards
klaus
|
|
|
|
Josh MacNeil
Location: Massachusetts, USA Joined: 23 Jul 2008
Posts: 197
|
Posted: Tue 14 Oct, 2008 8:12 pm Post subject: |
|
|
I just finished mine. I've got a couple of other projects I'm working on so I haven't got around to taking pictures. I'll post the axe project soon; along with the low down on how I did it.
-JM
|
|
|
|
R D Moore
|
Posted: Tue 14 Oct, 2008 8:31 pm Post subject: |
|
|
Christian Callender wrote: | I'd still love to see some pics of these projects, as well as any ideas as to how to best strip the original paint and blue the axe heads. |
Use some good paint stripper, clean the metal, then cold blue it. The paint stripper can be found in a hardware or paint store and the cold blueing I used is made by Birchwood Casey in a kit I got from Brownell's. Just follow the directions on the paint stripper can and the instructions from Birchwood Casey and the metal should take on a good tone. I let the blueing stay on the metal for about 90 seconds and it worked better for me. Just be sure to follow the instructions and precautions printed on the containers and be safe with these chemicals.
|
|
|
|
Christian Callender
Location: Maryland Joined: 28 Mar 2005
Posts: 19
|
Posted: Sat 18 Oct, 2008 8:39 am Post subject: |
|
|
I told a friend of mine about my project, and he was so excited he ordered one himself. We talked about how to strip the paint and he mentioned that he has a sand-blaster. We're going to try it out, and I'll let you guys know how it works.
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|